lookin for a parts source

[vintage-yungin]

Lookin for a parts source that has all this, I have cheacked parts express and digikey that was no help.

Heres a list of all the parts I need:

RESISTORS

2-1,000 OHM 5% 2WATT
2-750 OHM 5% 2 WATT
2-300 OHM 5% 1 WATT
2-100,000 OHM
2-100 OHM
2-2,200 OHM
1-600 OHM 10% 10 WATT
1-850 OHM 10% 10 WATT

CAPACITORS

4-200uf 15V
2-320uf 6V
2-50uf 10V non-polarized
2-500uf 15V
4-4.7uf 25V
2-10uf 25V
2-47uf 16WV
2-500uf 6.4V
1-200uf 3V
2-35uf 30V non-polarized
1-470uf 16V
possible power supply caps=$

DIODES

1-Silicon diode 1A 200PRV

OTHER

Light socket
Light bulb

Any help would be much apreciated.

Thanks,
Shawn.

[avionic]

When building DIY or repairing amps it is very difficult to find one supplier that "has it all".I typically have to source 2 or 3 or more places just for one job...Question..What kind of resistors ? carbom.metal,wirewound...What flavor of capacitors film,ceramic,electrolytic,etc.Other sources are...



Mouser Electronics
Newrark Electronics
Allied Electronics

What'cha building or repairing ?

[Kuma]

Handmade Electronics (http://www.hndme.com/productcart/pc/viewCategories.asp) has a nice selection of resistors and caps.

BTW, their IRC GS3 military grade resistors are inexpensive and quite nice (thanks for the tip, PakProtector). They also have Mills WW, and a host of other good stuff at decent prices.

[westend]

Check out AK sponsor Partsconnexion, also. They have some botique caps and maybe some decent sized power caps on sale. If you're taking the time to recap the electrolytics, especially in the signal path, you might want to look at some poly-pros for that use.

[x_25]

And if all else fails Mouser (http://www.mouser.com/) will have it. :thmbsp: