KWILLIS
05-05-2008, 02:20 PM
The cartridge pin insert in this arm is not removable / replaceable. It is somehow molded / glued into the headshell. I have no idea of the purpose of the little screw on the bottom of the armtube behind the headshell. It certainly is not needed to secure the cartridge pins insert into the armwand. This part will absolutely not move. I had to drill / file it out. When I get the new wire, I will not have pins in the end of the armtube. The wires will go from the DIN insert at the tonearm base all the way to the cartridge in one continuous run.