r0n22
08-06-2008, 11:05 AM
Hey so this is my project. A H.H Scott A426. Which i got from my cousin which it has been sitting in his basement for awhile. Needless to say it doesn't work. So here is what happened so far.
Their is a power fuse that is accessible from the back of the case and 2 more fuses on what I think is the power supply board. The two fuses inside blew. So I replaced them. They blew again so I looked around and figure out they were not the right amperage. So i put the right amperage in and now the power fuse in the back of the unit is now blown. I think that it might be the transformer but I am open to any suggestions that you might have. None of the caps look bulged and no burn marks that I have seen.
(Pictures when I get home)
Also do any of you guys have schematics or Service manual or even a owners manual for this thing because I cannot find anything online about this amp. It seems from a website that I saw that the A416, A426, A436 are built similar because they say that the service manuals are all the same.
-r0n22
Their is a power fuse that is accessible from the back of the case and 2 more fuses on what I think is the power supply board. The two fuses inside blew. So I replaced them. They blew again so I looked around and figure out they were not the right amperage. So i put the right amperage in and now the power fuse in the back of the unit is now blown. I think that it might be the transformer but I am open to any suggestions that you might have. None of the caps look bulged and no burn marks that I have seen.
(Pictures when I get home)
Also do any of you guys have schematics or Service manual or even a owners manual for this thing because I cannot find anything online about this amp. It seems from a website that I saw that the A416, A426, A436 are built similar because they say that the service manuals are all the same.
-r0n22