View Full Version : Sansui Z-3000X


WATTS
03-07-2011, 08:11 PM
It has no sound. Wondering what the problem might be. Any input would be appreciated.Thanks WATTS

avionic
03-07-2011, 08:13 PM
Welcome to AK..
Did you check all the fuses with a multimeter?

century tek
03-07-2011, 08:15 PM
I'm sure you will get many responses, but the question is, are you going to do the troubleshooting yourself? Most (not all) here, are deep into the hobby and the fun of DIY. Tell us your level of electronics knowledge.

avionic
03-07-2011, 08:22 PM
:yes: Check your tape monitor switches..Mute switch if applicable..Pre-out/Main-in jumpers ,on the rear of the reciever , if applicable..

WATTS
03-07-2011, 09:30 PM
Do not have the knowledge would have someone look at it .

avionic
03-07-2011, 09:33 PM
Did you check your switch positions?
Check your tape monitor switches..Mute switch if applicable..Pre-out/Main-in jumpers ,on the rear of the reciever , if applicable..

Does your machine have any indication of power?Does the unit "click" shortly after power on?Any lights or LED's light up?

century tek
03-07-2011, 10:01 PM
Where are you located? Maybe someone near you will reply and want to help you out.

Robisme
03-07-2011, 11:55 PM
Does the unit "click" shortly after power on?

If not, probably has a blown output. If it does, check all switch settings as previously advised.

Rob