I had a small stash of Marantz 2325 main power caps, have slowly used them up and need some new ones but can't find any. ....Help !

The original is a 70V 15000uf, screw terminals. 4" long X 2" dia.

Is there a source I haven't found ?? Or what's a good substitute?

I must be looking in the wrong places :scratch2:

One screw term and snap in's --- check the dim.

http://cgi.ebay.com/15000uf-75volt-Nippon-Chemi-con-Screw-Terminal_W0QQitemZ7596385375QQcategoryZ36336QQrdZ1 QQcmdZViewItem

http://cgi.ebay.com/5pc-80v-15000uf-Cornell-Dubilier-Snap-in-Capacitors-NEW_W0QQitemZ7597191365QQcategoryZ36336QQrdZ1QQcmd ZViewItem

Hey, Thanks ! :yes:

Will see what they have .....

Those caps on ebay are much smaller than original, if you want same size......
go this:

http://www.percyaudio.com/ (page 8)

Echowars showed me the cool website.

The Percy caps are solder lug. Usable, but it would be nice to find another screw terminal cap.

Here's a few from Newark:

CDE cap, 19,000µf 75V, 2" x 4.125", Stock #29C6136, $26.38
CDE cap, 19,000µf 75V, 2" x 3.125", Stock #19C2002, $31.76
Nippon Chemi-Con, 18,000µf 75V, 2" x 3.125", Stock #06H1271, $15.26


There are some more in a 5.625" length, but that may or may not fit...you'd have to do some measuring. As it is, the Nippon cap look like a weiner.

Thanks again guys!

Getting lots closer... I really appreciate your helping locate some caps.

Isn't this place great! :D

Shain, is this what you ended up with?

http://www.newark.com/NewarkWebCommerce/newark/en_US/endecaSearch/partDetail.jsp;jsessionid=DU35U2VK2SYZWCXDUZ1CFGIK 2OTCIIV1?SKU=06H1271&N=0

Or anyone else know if these will work in a 2325, screw terminals fit, no customising, etc.,