|
View Full Version : Sansui six Power ratings Johnlw7 10-16-2006, 11:18 AM I was looking on the back of my Sansui Model Six receiver,and noticed that it is rated at 220 watts of power.I thought all the six's were rated at 130 watts.Also it doesn't have the fuse compartment on the back panel either.It was bought in May of 74. spkrman57 10-16-2006, 01:23 PM I thought my Sansui Model 6 was 18wpc (?) Ron joelongwood 10-16-2006, 01:37 PM The Model Six is 28W RMS per channel with both channels driven into an 8 ohm load from 20-20,000 khz. Here are the specs (scroll down a bit to get to the Six): http://www.classicsansui.net/SingleDigitSeries.htm Pioneer727 10-16-2006, 01:41 PM Here you go. http://www.classicsansui.net/SingleDigitSeries.htm Ron Aage 10-16-2006, 02:12 PM I was looking on the back of my Sansui Model Six receiver,and noticed that it is rated at 220 watts of power.I thought all the six's were rated at 130 watts.Also it doesn't have the fuse compartment on the back panel either.It was bought in May of 74. That's the max wattage it can draw from the outlet you plug it into. Not much to do with rated output power... |