Using that could have the exact opposite effect of the defroster paint commonly used. Defroster paint typically has a higher resistance than the traces, but the circuit trace fluid may have a lower resistance. Probably won't be as dramatic a change, though.I noticed that too. I found the info about fixing. Seems I was in on the thread when it got started, I have forgotten so much. Found this pen at PE www.parts-express.com/caig-circuitwriter-cw100p-pen-7-ml--341-236. I may give it a go. I have a couple other EMITS kicking around that have been needing to be fixed. A new to me tweeter may be easier though. Definitely more convenient.
Using that could have the exact opposite effect of the defroster paint commonly used. Defroster paint typically has a higher resistance than the traces, but the circuit trace fluid may have a lower resistance. Probably won't be as dramatic a change, though.
Just checked the reviews on Amazon, that Circuitwriter stuff may not be precise enough for the EMIT traces.
There's no worry using an EMIT from a different model (as long as it's the same form factor), they all use the same diaphragm, only the magnets have changed. I've never compared two different tweeters in the same speaker but from what I've read here over the years, they all sound the same or extremely similar. Love them all!Replace the tweeter. Don;t take the chance.
Ribbons blew on my RS6's, shorted an took out my Luxman receiver.
Tweeter since replaced. The Luxman is still waiting repairs.
The Foam Factory is an excellent source for the foam pad around the mids and tweeters. They have a quarter-inch charcoal grey firm density open cell foam that's perfect for this application.
I got them going. All new foam installed. Had to steal both tweeters from my very beat and worn out RS 1.5s. Very impressive so far, but then I am of a mind that I never met an Infinity with an EMIT tweeter that I didnt like. Driving them with an H/K Citation 19 and Marantz 2285 as the pre. I have another 19 and can run one per channel or I can dig out my Crown amps. Both will have to wait until the weekend. Pic sucks but you get the idea.
I got them going. All new foam installed. Had to steal both tweeters from my very beat and worn out RS 1.5s. Very impressive so far, but then I am of a mind that I never met an Infinity with an EMIT tweeter that I didnt like. Driving them with an H/K Citation 19 and Marantz 2285 as the pre. I have another 19 and can run one per channel or I can dig out my Crown amps. Both will have to wait until the weekend. Pic sucks but you get the idea.