Got pipped at the post, they went for close to $400 Aus. The 4 woofers needed reforming and the cabinets looked well worn , had I been paying closer attention I would have gone all out
Got pipped at the post, they went for close to $400 Aus. The 4 woofers needed reforming and the cabinets looked well worn , had I been paying closer attention I would have gone all out
I have a set of rsIIIa’s that I’m trying to recap as well but am not sure about what seems to be seven 3.83uf caps in parallel. Trying to make a parts list but can anyone give me guidance on these? See pics. Thanks in advance!
would you post pics of the speakers themselves? I've only seen pictures a couple of times, would like to see the difference between the RS 4 /a and RS II /b and RS 3
would you post pics of the speakers themselves? I've only seen pictures a couple of times, would like to see the difference between the RS 4 /a and RS II /b and RS 3
Thank you Jem6789, they look like big brothers to my RS 4, the 4B and also look suspiciasly(spelling) almost like Kappas. Was the Kappa line the outgrowth of the RS line?
and, I wonder why the RS II and IIb look so radically different then any other RS series?
I have a set of rsIIIa’s that I’m trying to recap as well but am not sure about what seems to be seven 3.83uf caps in parallel. Trying to make a parts list but can anyone give me guidance on these? See pics. Thanks in advance!
Strange. The Tech Sheet shows 5, 7, 16.5 and 600uF capacitors. No 26.8uF caps. But Infinity was (in)famous for modding crossovers without documenting the changes. If you, I'd replace the caps with the same value as what's in there. Though, you could use 1 or 2 caps, to replace the bundle, if desired?