Recent content by AudioJag

I have used the SAS/Boron for more than a year in my Shure V15/IV..... Loved it from the first play..... recently purchased the SAS/Sapphire..... I love it even more... I believe that I heard bass improved on the first record I played..... I have never heard better clarity and definition ...

I use the Baerwald on all turntables I work with..... cuts through all the BS..... and they all sound great, beginning and end of LPs..... -- just my opinion.... we all have them here in this great forum... enjoy your turntables, that's most important.... play records!!

Calypte...... Get an "In The Groove" record cleaner from Music Direct.... and use it under an led light prior to playing each side.... you will be amazed how simple this is and how well it works..... I've been using them for years, and I recommended that Music Direct pick them up earlier this...

No..... the TT is 37.7 by itself !! Must be rubber..... the hardware store should have them... if not you may be able to order via ebay or Home Depot...

I don't know..... you have to give it try .... there are no guarantees... but I know your situation..... I made some smaller but similar ones for a Thorens TD145 I sold to a friend... I believe they work fine too.... I really think it would be best to get your TT off of the receiver for best...

I knew the darn Sansui SR929 was heavy everytime my back hurt when I picked it up..... actual weight on my strange special designed isolation feet.... 37.7 lbs

BTW... weight of the Sansui 929 is near 30 lbs

You know what pvc pipe is.... well imgine a 4 inch pvc pipe needing a cap.... that's what they are for

Don't know why photos duplicated .... but there they are

Bagiz010... Hope the photos help...

4 in caps might be too big if you want to have the tt on top of your receiver.... I would find a way to separate the two so you can use the 4 inch caps... or at least 3 inch

Hi Bagiz010..... I had a similar problem with my Sansui 929 back some yearsago and engaged my younger mind to come up with a solution.... and I did !!:-) Try to follow what I describe... and if you are not sure I will try to take some pictures for you. Go to the hardware store and purchase 4 ...

Thanks Tom..... I'll fahgettabout the Zirconia.....

Tom and Chris.... I thank both of you for such incredible attention to detail.... I don't know if my question is really answered though... I have been using the following and love all three: Shure V15 w/jico SAS/Boron ; Denon DL160 w/saffire line contact ; SoundSmith Boheme w/ruby line contact...

JICO SAS/Z N97xE Replacement for Shure N97xE Stylus Is the Zirconia even more fragile than the Boron or Sapphire?? Thanks to all in advance....