Recent content by RexJ

Bought this one mid 80s.

Another one

One of the many

There is a friction plate that engages the arm and pulls it over. Likely need cleaning or adjusting.

this is how a creased KEF t33 measures. No fixing this one.

Gasket paper from your local auto store would work and be easier to cut out.

yup. log measures are added.

KD750 counterweight stub diameter, 13.7mm KD650 .... 13.5mm, yup, it will not quite fit on. Jelco ... 12mm If you manage to get a whole KD650 arm, you can drop the whole thing in, keeping the height adjustment from the KD750. The arm from the 650 is a slightly better arm (better wiring...

the kd650 cw is a different diameter

Try it upside down.

Or converted. All the transformers should have dual primaries. Keep the cable capacitance low.

Check out a kef 103.2.

Experimenting

The answer is above. Mix some polyester resin, mekp and chalk and use that as glue. You might want to use unpromoted resin and exclude air with tape or something.

Unlike the Townsend, the Kenwood has a lid, but yes, eventually the silicone will become filled with dust. That would be many years down the track.