visualine
Reaction score
0

Profile posts Latest activity Postings About

  • It's late and I cannot find my jewelers screwdrivers to check on what I'm about to say so please excuse me for not being positive. Yes it is in the TP50. I needed to space the cartridge away from the head shell with a pair of the smaller spacers that came with the headshell. It's hard to measure but it looks like about 3/32 of an inch. According to a conversion program I have it's about 2.4 mm. So I would assume that the right size is 2.5 mm spacer. Also, I have my turntable mounted on a shelf firmly attached to the 2x4 wall studs. This completely eliminates the bouncing from foot falls. Once installed, remember to do BOTH the angle and overhang adjustment. The height isn't perfect and you must get the top of the headshell parallel with the record surface.

    Good Luck.

    Shelly_D
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom