hopjohn
Silver Face
I've primarily used the KWs as above but also KGs. I'm going from memory but I've used both the 10000uf 50v and 6800uf 63v. I think it runs around 48v so 50v is a bit close. These are all 12.5 mm leaded. The holes are 15mm LS but wide enough to allow. If I've ever widened the holes it was only just slightly. I don't know of anything better to use, and believe me I've looked.
Edit: Forgot to say that I've used FWs as well.
Edit: Forgot to say that I've used FWs as well.
Last edited: