Search results

https://www.percyaudio.com/Catalog.pdf Page 8.

Try Percy Audio . They used to have Nichicon's super through at 22000uf at 80-100v.

Its a miliamperes meter. With a standard 3aaa batteries it goes full scale . It only needs about 0,77 volts to operate .

Correct.

Ok i read the second page , to find out that Kevzep has replied.

While a little late. G22K does have a very sensitive protection circuit. I have encountered it . It did kick in at around 100wrms. There are some workarounds , i believe the guy from new zeeland has one , cant remember the name. Ok got it KEVZEP.

There were a company jKH or whatever that bought sansui's old stuff to repair some amplifiers. Try to look there. Or the Aqua Lab.

They certainly did . Only jdm , were manufactured. I know what i'm talking about . Still selling mine.

Sorry for the kindness of words . It just came out of me .

Well mine is fully restored and i have masterfully decided that it doesn;t work for me anymore . So please let me sell it. It is in a fully working order . The only reason i am selling it is i got bored of it. Nothing else there dear . Not much to say there dear .

Whoever wants a fully recaped cd 10 just pm me.

I use the same 22 μf mkp on my tweeters. Just for protection in case the protection circuit fails , and dc comes out frying my precious tweeters.

You'll have to bend a plug in a arrow look on the inner side of the tray , to allow the tray to come out. Actually two arrows. One on each side.

No way there's no belt. Its hidden underneath the tray. Typical KSS transport.

B 2301 was introduced on 1982 , C 2301 was a couple of years later on 1984. It took them quite a while to finalize c2301.

I am still wondering what he measured on the caps , with the multimeter on the 1k scale .

Thanks John , much appreciated. Are they required in pairs for the D11ii ? I haven"t open up the amp yet.

Hello Guys , long time no see , well almost. Just to hijack the thread since it involves AU-D11 II. I'm looking for the rectifying diodes for D11ii for a friend that got his D11 with burned ones. Any ideas ? Thanks in advance.

Good luck with the CD 10. I had changed all 93 electrolytics on various pcb's , along with the others on PS. Some resoldering was required. Unfortunately the absence of a differential circuit in the input or output , makes it sound dull , lifeless without punch , without micro , dynamics or...

ok thanks for that. I assume you set the switches in a manner so to have the min dc offset on the output of the board correct ?

Once more.

So i thought to remind you about the adjustment page of c2301 .

ok will do.

One more question. Do you have a complete service manual of c2301 , that includes a page with adjustments ? As far as dc offset for line and phono stages?

Ok thanks a lot.