Search results

  1. Bob Clay

    Suggestions for interconnects for bottom loaded source inputs...

    thanks! I do believe it’s closer to 45 degrees so I’ll try your suggestion.
  2. Bob Clay

    Suggestions for interconnects for bottom loaded source inputs...

    Saw these too. Right angle is for sure he play. Just hoping to find a bit better of a product. thanks for the input!
  3. Bob Clay

    Suggestions for interconnects for bottom loaded source inputs...

    Hey guys. Recently procured a badass Fisher x101 and connecting interconnects under the unit is new to me. Most of my RCA cables have bulky termination housings so its a very tight squeeze if they fit at all. Any recommendations for interconnects that work best with these type of short and...
  4. Bob Clay

    Austin, TX SME Tonearm Specialist

    Hello All Hope everyone is having a good Sunday so far. Just recently had my SME M2 9 tonearm rewired snd I’ve mounted it back onto to my Thorens 150 and I’ve done my best to execute a proper set up. I’ve tinkered myself into a frenzy though and I’m not sure if I have set it up to it’s max...
  5. Bob Clay

    Fisher 400 - Late S/N - Tube Question

    Hey guys I am swapping out some tubes on the Fisher 400 and i wanted to get some expertise on this topic. I am only using the Aux input. After looking at the schematic i still cannot determine with tube positions are associated with this input. I would appreciate some insight. thanks!
  6. Bob Clay

    Noob Question for Fisher 400

    Just so happens that i traded my Dynaduio Special 40's for a nice pair of Cornwall 3's yesterday. The Fish X Cornie combo is very very nice indeed.
  7. Bob Clay

    Noob Question for Fisher 400

    Thanks for the input. I am in the process of searching for more efficient speakers as we speak. The Dynaco A35 although not very efficient just became available locally and i see so many rave reviews of the Fisher 400 and A35 combo. The other highly mentioned pairing is the heresy. I am torn and...
  8. Bob Clay

    Noob Question for Fisher 400

    Hello All Please dont flog me for this one but my speakers are pretty inefficient and the 400 obviously has a hard time driving them (i knew this going into it). I have to turn the volume up damn near all the way to get them really rocking. The speakers have a 6 ohm impedance. My question is...
  9. Bob Clay

    Static Elecricity

    Lordy. The static is starting to rot my brain. 3/4 records I have to peel off the cork slip mat. Doesn’t effect playback but I’m just so puzzled as to what the cause may be. Just ran a few record through my audio desk cleaner and the static is worse! Should I lube the turntable more often...
  10. Bob Clay

    Lubricating Thorens TD 160 MKII

    hey guys. Lubing the bearing well and sub platter shaft today. Do you guys like sewing machine oil for this application? i plan on flushing the well with ISA, wiping it clean with paper towel and then filling about half way with light sewing machine oil. First time doing this so I am piece...
  11. Bob Clay

    Most compelling replacement stylii?

    hmmm - my gut says SAS my wallet says Elliptical. Ill take Elliptical for $100 Johnny.
  12. Bob Clay

    Most compelling replacement stylii?

    ...best after market stylus option for these particular carts
  13. Bob Clay

    Most compelling replacement stylii?

    For Shure M91 and 95 ED. Would love to get some input here. Thanks
  14. Bob Clay

    Best online vendor for McIntosh knobs

    hey guys, scored a sweet C29 preamp last night and one of the knobs could use replacing. Particularly the input selector. Would appreciate some guidance towards a site or AK member that specializes in parts for vintage McIntosh. Please and thanks for the time
  15. Bob Clay

    Platter making audible contact with faceplate on Thorens TD 150

    problem solved. thanks for the quick help here.
  16. Bob Clay

    Platter making audible contact with faceplate on Thorens TD 150

    Hey guys, hope the Holidays have been fine for everyone and i appreciate any insight into my query here. I have a restored Thorens TD 150. When i put the record weight on the platter (with the mat and record on) and bring it up to speed the platter makes audible contact with the faceplate...
  17. Bob Clay

    Best Online Tube Vendor

    Great advice. thank you
  18. Bob Clay

    Best Online Tube Vendor

    Hi Guys, Hope everyone is having a fine Friday afternoon. I am looking to replace the tubes in my Rogue Ares Preamp. I have a Grado Sonata 1 that I am looking to pair the right tubes with. I have a few in mind but as I am new to Tubes i wanted to make sure i consulted with you fine folks...
  19. Bob Clay

    Best MC capable Tube Preamp?

    Wow great get!
  20. Bob Clay

    Best MC capable Tube Preamp?

    ^^jusr rearranged and reconnected and I’ll be damn it made a big difference. Thanks wildcat!
  21. Bob Clay

    Best MC capable Tube Preamp?

    my turntable interconnects have the grounds attached for each channel. One is spade and the other is exposed (spade fell off before i purchased the unit second hand). Ground lug on the ares has the hole in the lug for insertion. So im putting one channel ground through the hole and the other...
  22. Bob Clay

    Best MC capable Tube Preamp?

    Oy Vey - Ive got a little 60hz hum going on now. Ares going into Marantz 2325. Picking up a little hum when i turn the volume up. Ive checked the external grounds and everything seems to be fine. lord god i just want to enjoy my stereo without troubleshooting anything for only a day.
  23. Bob Clay

    Cable Management Tips

    Morning AK I need some guidance on proper cable management. This is in an effort to mitigate any noise caused by too many wires & cables in close contact but also to tidy up. I can’t stand seeing a hundred wires dangling from behind the credenza. Every time I think I have it figured out and...
  24. Bob Clay

    Best MC capable Tube Preamp?

    Yep Grado Statement Sonata is indeed what I meant.
  25. Bob Clay

    Best MC capable Tube Preamp?

    Grado Sonata 1
Back
Top Bottom