custom

  1. I am simone

    Car stereo not producing sound

    I don't know a lot about this kind of thing, but i recently purchased a car with a nice sound system that worked at the time. The car has has a lot of battery issues and at one point when the car died, when it started the front two speakers didn't play sound. When it died again, same with the...
  2. Beauts

    Custom Wood Case for Sansui 7070?

    Hi there friends! I recently acquired a Sansui 7070 in beautiful shape. In sounds soooo good. The case is in very nice condition with no peeling at all. But, I can't help but to think how much nicer this piece would look if the veneer was lighter, blonde instead of brunette. Is there anyone...
  3. Drakevinyl

    McIntosh 2100 Tube Hybrid Custom?

    Recently was on Marketplace and found a McIntosh 2100 on there for what is normally pretty low compared to other McIntosh gear ($550 for those curious). Looked into the listing and the model and noticed the listing had customized it with tubes. I’ll provide some pictures but I was wondering...
  4. C

    Little Dot MKII Paint Job

    Though I'd share this. Pictures and resolution don't do it justice but we went for a retro vibe with the colours, style and font. It was achieved using House of Kustoms root beer candy paint as well as Max Meyer Paints Hope you like it!
  5. swimdusty

    Modern 4000

    I have a 2000X that has been in the family for 50 years. I had it redone by a local guy and it sounds better than I remember from my childhood. I bought a Sansui 4000 to go through myself. I have not researched any mods to incorporate into the design, but plan to do any upgrades that I can. I...
  6. forceof1

    Custom Dust Covers ?

    So, I killed my cart as a result of not having a dust cover for my TT, PL 550. Tough to find. I've worked with metals, wood, plastics and other materials professionally for many years and have a design background as well. The question is...........What do you think the market is for custom...
  7. T68

    Looking for tips&trix to make ha heavy layered plywood plinth

    Hi! Being a bit lazy and (as my wife likes to point out) bad at finding stuff, I would appreciate your best advice or links regarding making a straightforward heavy layered plinth for an idler driven turntable with all the stuff bolted in the usual way to the top plate. Some of my questions is...
  8. L

    Panasonic RD-2900 dust cover

    Does anyone know of some means to obtain a dust cover that would accommodate my turntable?
  9. X

    Fully restored Infinity Kappa 8's in Olde Maple Piano Finish !

    Just became an AK Member so I hope i'm using this right. I have fully restored this pair of vintage Infinity Kappa 8 speakers from top to bottom, inside and out. With over 100 Man hours invested I can truly say that it was damn well worth it. I'm an old soul at heart and boy, do I miss when...
  10. yardlad

    Vintage Magnavox - REDUX - Help?

    Hey Everyone, I have a 1950's Magnavox 477P (I think) entertainment console - TV, radio, turntable. My mom told me it died before JFK due to a lightning strike near her parents' house. I pulled the chassis out and cleaned it up a bit.. There are a lot of different tubes. The only ones...
  11. JPJ

    very pricey custom altec model 19s on ebay

    no affiliation with these, just came across them on ebay. could they be worth the money? https://www.ebay.com/itm/Altec-Lansing-Model-19-Custom-Speakers/253616599174?hash=item3b0cba3086:g:OHcAAOSwkRha9cBc does anyone have experience with this guy or shop? looks like they specialize in...
  12. greenflash

    Tannoy T115/Cambridge - Custom Grills

    Hi everyone, I've just bought me a pair of Tannoy T115, really eager to get them (will be shipped). A picture from the seller below. Some call them Cambridge, but I saw a picture of the Cambridge and they say Cambridge in the label. So not sure if they're the same. Anyway - I've learned they...
  13. A

    Custom Sherwood S-7310?

    Hello, My name is Aaron and have a Sherwood s-7310 I recently acquired this amplifier from a girl I know's dad. He gave me the amplifier and I have been using it for a while now with a record player, and recently the left speaker stopped working and I realized the fuse broke so I did some...
  14. OP Music

    Hey guys, check out these custom speakers!

    http://www.ksl.com/classifieds/listing/42569309 What do you guys think about these? Seems pretty pricey for a custom speaker.
  15. musichal

    ST-70 Custom Died - Where To Start?

    Perhaps I just found why I shouldn't own a tube amp. Music was playing, at low-ish volume. My wife was standing beside the amp and I was looking at her, in conversation. There was no flash, no pop or buzz or noise of any kind. No odors. The music quit playing, the tubes faded. Won't fire...
  16. L

    Good Vintage Cabinet Links to Buy/Gut?

    Hi All, I've just inherited my dad's late 1970s Sansui Setup (turntable is a Dual 600), and I'm having a heck of a time housing it. The Amp, processor and tuner models are of the type that could be screwed into a rack (consumer not commercial), but my dad threw the rack out sometime in the...
  17. A

    Crossover for Technics SB-L50's

    So I bought a pair of Technics SB-L50's at Goodwill the other day - in really nice shape, the look like they've never been used. Anyways, I bought them for a project for my 12yr old son and I. We are taking the speakers out and are going to build custom enclosures. I want to do away with "Linear...
  18. freetoad

    NAD Series 20 3020 missing AMP Circuit!?!?

    Hello all! I'm pretty new to Hi-Fi and I picked up what I thout was a great deal on a NAD 3020 for only 25$ I got home and popped it open, I was dismayed to discover that the amp looked completely different on the inside compaired to photos ive seen online here and in other forums. Can you...
  19. Wardsweb

    Bespoked turntable for Watt

    I thought I would give you a little glimpse into the table I am building for Watt. Here is a picture of the plinth designed in CAD.
  20. Thorens plint Palissander Maple

    Thorens plint Palissander Maple

    Thorens TD160 with custom plinth in Palissander and birdseye maple
  21. CK2III Cavalli Kan Kumisa headphone amp with wood and aluminum case

    CK2III Cavalli Kan Kumisa headphone amp with wood and aluminum case

    Cavalli Kan Kumisa (CK2III) headphone amplifier with high quality custom made wood (mahogany) / aluminum case. Can be configured for 230 V or 115V Epsilon 12 - DC protection and delay muting circuit Enclosure: Mahogany wood and aluminum with massive 3.6mm brushed aluminium front panel and...
  22. M3 headphone amp with wood and aluminum case

    M3 headphone amp with wood and aluminum case

    M3 class A headphone amplifier with active ground and high quality custom made wood (mahogany) / aluminum case. With Sigma11 PSU (24V) and Epsilon12 circuit. Can be configured for 230 V or 115V Epsilon 12 - DC protection and delay muting circuit Enclosure: Mahogany wood and aluminum with...
  23. FocARist's

    FocARist's

    Vintage EV styled Aristocrat cabinets, AR TSW 11" woofers, dual Focal 7C114 S7 mid bass, Focal T120 Inverted linen dome 1" tweeter, modified Dayton (PE 260-150) xovers.
  24. 1977 Lincoln Town car custom by Eagle Custom works

    1977 Lincoln Town car custom by Eagle Custom works

    Totally original, last of the customs done by Eagle
  25. Adcom GCD-575

    Adcom GCD-575

    Thanks to Haoleb for his work. This is my Adcom GCD-575 transport parked on a set of Yamamoto PB-9 and PB-10's. Thanks to Brian B(Venus Hi-Fi) for the discs.
Back
Top Bottom