rca

  1. RuDee

    Pioneer Cable Models, RCA, PL, DIN, Speaker

    Hello, sorry if i am repeating someone else, i could not find anything useful. Is there any info about pioneer cable models around 70's and 80's, (catalogs) RCA, DIN and so on? As of my research i was able to find only JC-200 speaker twisted cable. Thank you!
  2. richardg0n

    Pre Main RCA Internal Wire Chewed by Rat - PU01 Marantz 2325

    Greetings AK, Recapping the PU01 board on a 2325 and Found the blue shielded cable connected from PU01 to one of the RCA Pre inputs. Can someone please let me know what kind of wire I should use to replace this wire apparently chewed by a rat.
  3. rolf logan

    RCA Model VLT 41S

    Note attached photos of an RCA Amp, solid state, pulled from RCA model VLT-41S featuring Tape input, AM/FM, Phono Stereo Console. I am seeking a schematic drawing to recap the amp. Any insights would be appreciated. I get good quality sound from the right side, but the left is weak and...
  4. PROJECT 2501

    RCA 78rpm MG Dual stylus Cartridge

    From the EXTREMELY limited amount of info on the net regarding these phono carts I'm not even sure that I've accurately identified this cart. I still feel as though I don't know what to call it. I'm hoping someone is willing and able to extend their knowledge of an esoteric area of phono...
  5. richardg0n

    Marantz 2325 Right Channel Troubleshooting

    Greetings AK Members, Working on a 2325 restoration/recap and asking for your guidance. I have rebuilt/recapped the power supply P800, PE01 Pre amp, P400 Phono amp, PU01 Multipath, and PH01 Buffer amp board. I have restored several 2325s, and this is the first time I am experiencing an issue...
  6. DomPal

    BNC from function generator to RCA input(amplifier)

    Hello people! I want to test my Marantz 2270 amplifier by connecting a function generator to the AUX rca input. My function generator has a single BNC female output connection, 50 Ohms. Can I use this adapter I made(pics). It is a BNC male input that splits it into two female BNC connection...
  7. N

    Vintage theater audio

    I recently moved my cabinet shop into an old downtown building that I discovered was once a movie theater probably around the 1940’s. While remodeling, I discovered the audio equipment that would have been used in the theater. Two Motiograph tube amplifiers, two RCA MI-9461 speakers in rather...
  8. Yamaha5000

    Yamaha CA-1000 Gold RCA upgrade

    This is the rear RCA Panel for a CA-1000, I would like to upgrade the RCA connectors to Gold. I am seeking ideas for custom PCB design to accommodate this.
  9. moodyj2000

    Thorens TD-105

    A while back I picked up a Thorens TD-105 turntable mostly for the Stanton 881 cartridge which was worth more than what I paid for the table. Surprisingly the table is not that bad and I will probably keep it for something to pass down to one of my kids. Currently restoring a TD-165 and a Dual...
  10. M

    Connecting NAD 3020 to an active subwoofer?

    Hi, I am putting together a system with a NAD 3020 for a friend. I also have a really nice sub from BK Eletronics (XLS200, details here). Not the biggest image in the world but you can see that it just has RCA inputs and a Speakon. No daisy chain ouputs. For those who don't know, here's...
  11. AlexHempel

    RCA MI-112182 Monoblock Tube Amps

    Been wanting a pair of RCA PA/theater monoblocks for a while, but never pulled the trigger -- until now. Bought a pair of these for probably more than they're worth. The seller states they're from the collection of an ex-RCA engineer, which I'd normally be skeptical of, but could be true given...
  12. kcline

    Tubes Notes from The Last Tube Collectors Association Magazine Dec 2019

    This information is from AWA holdings of Dowd-RCA Archive published in the last issue of the TCA Dec 2019. RCA Tube "Salvage Schedules" 2A3, Low plate current shrinkage may be salvaged by tapping with hard felt hammer, Tap tube on dome in a plane parallel to the top mica while the AC test...
  13. W

    RCA cable colors

    Hi! Im a newbie and have a few questions about my Dual cs601 turntable. The phono output is a black and red RCA cable. I have a preamp with Red and white RCA-phono input but i have no Idea what color should be in the input. I think (obviously) red-output in the red-input + black-outoput in the...
  14. K

    RCA line level switch recommendations?

    Hello AK, I have a Marantz 2230 that I'm using as a preamp for my system and all the line level inputs are currently being used. I would like to integrate streaming into the mix. I'm looking at getting a sonos port since I already have sonos speakers throughout my home in addition to my hifi...
  15. DavidBalding

    RCA 4VF534 Console restoration

    I have recently inherited my late grandfather's RCA 4VF534 console that was produced in 1963. I have fond memories of listening to it as a kid as as such have just got it home and have already fired it up for my kids. My hope is to restore it back to it's original "sound", look, and feel. I...
  16. Zack Sainz

    Home Brew Interconnects

    Hello All! About a year ago my friend sent me this link: http://www.soundstagenetwork.com/synergize/synergize021998.htm My friend had great success and has a very high resolving system. B&W 803D triamped with dual mc275 and a solid state McIntosh (I don’t remember the model). He said he was...
  17. B

    Roksan Kandy amplifier - One input broken?

    Hi, I have a Roksan Kandy integrated amplifier, with multiple working inputs. But the "CD" input has no sound. I can repair electronics, but I'm confused with this. The RCA connector itself is fine, it passes current with a multimeter. It then goes into a circuit, circled in red: Is it...
  18. DoctorJon

    Two Turntables - Using a RCA Switch?

    Hello, I am looking to hook up two turntables to one receiver and the only viable method i've researched is using a RCA splitter box and running it to my receiver. Does anyone have any experience using these boxes and if they work well (without a humming noise). I am also interested on how I am...
  19. Crooked14

    Sansui SR-929 Damaged RCA Plugs and Wires (help appreciated)

    Hi, Everyone. I would first like to say that I TRULY appreciate the wealth of knowledge that I have discovered here from this amazing community -- Thank you! This is actually my first post. As, I use the search function, and it usually works quite well. However, I am at a loss for how to deal...
  20. 4ever7

    SX-750 RCA ports interchangeable with SX-650?

    Hello everyone Planning a restoration of a pioneer sx-750 and trying to find out if the RCA ports on an sx-650 will fit on an sx-750? My initial guess is yes but wanted to see if anyone has done this or definitely knows Any help is appreciated
  21. Old Guy8

    RCA tube radio phono console and second similar radio console at SA, Loves Park Il

    Small upright RCA tube radio console. Two 12" woofers and two tweeters. I saw Tungsol tubes in it. $160. Doors on front. Front facing receiver on left. Slide out RCA TT on right side. Didn't check if mono or stereo. But has FM. I should have taken pics. Nice condition. About 3' wide. Another...
  22. rocksy

    DAC Advice - HDMI(ARC) -> RCA with volume control

    Hi all, I've seen a few posts where people ask about something that can take the HDMI audio signal from a TV's ARC-out, and convert it to an analog signal for use in an older receiver. I'm putting together thing as follows: Apple TV --(HDMI-IN)--> Samsung TV --(HDMI-OUT [ARC])--> DAC...
  23. richardg0n

    Marantz 2325 Pre-out female RCA short no sound

    Working on 2325 with left channel out. The sound output returned when I was using RCAs to test and crossing channels between Pre-out and Main. I noticed RCA was sensitive to touch on one of the Pre-Out RCA outputs causing the left channel sound to cut in and out. I used Deoxit D5 spray and...
  24. symkob

    Did I buy the correct RCA cords for my Technics?

    So, i made a post here bout a week ago asking why my new cords were shit sounding and now i know. So i ordered from Kabusa, since a lot of people told me to. I contacted the dude that owns the site and he told me to get the Mogami W2528 Molded Gold Connectors they’re the first ones listed on...
  25. symkob

    Replacement RCA Cables for Technics SL-1800

    Are these any good? https://www.fluance.com/rca-audio-cable-ca03 If not, can someone link me to a good, reasonably priced cable I can solder into my turntable?
Back
Top Bottom