Connection of the main capacitors in BA-F1

Kale

Super Member
I am currently working on one Sansui BA-F1, but now I am not going to show you a complete restoration on that power amp, just one part of that, restoration of the main power supply, to be precisely… just connection of main power capacitors…

Someone in the past tried to fix something and he shorted some of wires to those capacitors, so I decided to restore that…

I have not been satisfied how ground connection was on the main power capacitors, so I decided to make a new one:


35960856856_9cb25c0163_b.jpg



35613409220_67850ebe76_b.jpg



New main capacitors…


35613409390_78e28ab749_b.jpg



35613409570_5ba3ccb789_b.jpg



Ground wire from transformer


35960856206_1bbb77a8d5_b.jpg



Ground wire from transformer connected…


35960856516_6b42eff4f4_b.jpg



And the final result…


35960856356_3f806886cf_b.jpg



35960856016_d4961270ec_b.jpg
 
Thank you guys… I decided to use nuts and bolts because on that way, it is much more easier to disconnect the output power module, than when wires are soldered. I decade to add bypass foil capacitors too… so at the end, I am satisfied…
 
Hahahaha :) …. Thank you so much for those nice words about my work… I am really just enjoy working on those Sansuies, I spent a complete one day for making a good connections for that main power supply, and after all, I am very satisfied.
 
Back
Top Bottom