Help with a structural vibration issue in a rental home.

[pfcs49]

my belief is based on long experience w/B&O linears where others were awful.

IMO, the vibrations have to be high-seismic, to affect them, something I've not experienced!

 

[Bill Ferris]

my belief is based on long experience w/B&O linears where others were awful.

IMO, the vibrations have to be high-seismic, to affect them, something I've not experienced!

Mine too pfcs49 , with the B &O 4002`s set for 3/4 VTF, both, one at my parent`s, gifted to them, by me, and my own TT setup in various local environment`s, always center bubble leveled..

 

[Dingman]

OK, I'm not going to read all the silly responses here.
The answer is simple. Throw some tacks on the floor of the hallway. People could still get up and down the hallway, but slowly and carefully.
Problem solved.

 

[KentTeffeteller]

my belief is based on long experience w/B&O linears where others were awful.

IMO, the vibrations have to be high-seismic, to affect them, something I've not experienced!

Mine is very seismic, on everything else, the B&O linears are very well isolated. So for many would work.

 

[Chosemerv]

OK, I'm not going to read all the silly responses here.
The answer is simple. Throw some tacks on the floor of the hallway. People could still get up and down the hallway, but slowly and carefully.
Problem solved.

This might be the best solution yet!