The only one it had was around 250k. Tony
tonebells AK Subscriber Subscriber Aug 9, 2017 #82 400Hz at MPX matrix output to selector switch. Tony
tonebells AK Subscriber Subscriber Aug 10, 2017 #84 The distortion shows up after the junction of R626, R628 and C620. Tony
tonebells AK Subscriber Subscriber Aug 10, 2017 #85 FM mute works much better now the the trimmer R328 is installed. Tony Last edited: Aug 27, 2017
tonebells AK Subscriber Subscriber Aug 13, 2017 #86 Voltage at Q605 is off d is -11.8 should be -12 g is -3.8 should be 0 s is -4.9 should be -1.4 Tony
tonebells AK Subscriber Subscriber Aug 20, 2017 #87 Does any know a good sub for 34-1012 fet in the MPX matrix board. Tony Last edited: Mar 5, 2018
tonebells AK Subscriber Subscriber Aug 21, 2017 #88 I swapped the fets Q605/606 and the issue moved to the left channel.
tonebells AK Subscriber Subscriber Aug 21, 2017 #90 I am not sure what that would take. I have a Super Cricket. Tony
txturbo AK Subscriber Subscriber Aug 24, 2017 #91 Were you able to establish a cross for the JFET? If not I may be able to pull a working example out of an 18 and test it.
Were you able to establish a cross for the JFET? If not I may be able to pull a working example out of an 18 and test it.
tonebells AK Subscriber Subscriber Aug 24, 2017 #92 Tom suggested 2N5460,61 or 62. All I could find was 2N5460. When I get the old ones out I could send you the one that is working. Tony
Tom suggested 2N5460,61 or 62. All I could find was 2N5460. When I get the old ones out I could send you the one that is working. Tony
tonebells AK Subscriber Subscriber Aug 26, 2017 #93 Replaced Q605/Q606 with new 2N5460s and the FM sounds good. txturbo let me know if you want the old ones. Tony Last edited: Dec 1, 2017
Replaced Q605/Q606 with new 2N5460s and the FM sounds good. txturbo let me know if you want the old ones. Tony
tonebells AK Subscriber Subscriber Aug 27, 2017 #95 txturbo said: Nice work! Click to expand... Thanks txturbo. I would not be able to make it through these repairs without the help of you and the other great people on Audiokarma. Thanks again for all the support. Tony
txturbo said: Nice work! Click to expand... Thanks txturbo. I would not be able to make it through these repairs without the help of you and the other great people on Audiokarma. Thanks again for all the support. Tony
tonebells AK Subscriber Subscriber Aug 30, 2017 #96 I was just looking at something and realized there are two different ways to wire the mute adjustment. Tony
I was just looking at something and realized there are two different ways to wire the mute adjustment. Tony
tonebells AK Subscriber Subscriber Mar 6, 2022 #98 I replaced the speaker relays(R48-5D5-6L). I think I can finally call this one done. Tony