Post Your Marantz Gear Here!!!

Shamed me into action.... And extreme action per usual on my part....

Put a heat shield between them .... OF COPPER.... Hehehehehe..... Figured get some electrical shielding too.... Some... Copper is not great for magnetic shielding, but it does provides a ground plane....

Use this to create a ground plane for under my DAC and Preamp as well.

Do I hear a difference? OF COURSE I DO.... :p:king::crazy: And helps keep the aliens from invading my Model 9s.....


IMG_2384.JPG
 
Some pics of my 4430 and 4240. Getting ready recap the power supply board. Should be fun. Overall both systems are clean and still sound good.
 

Attachments

  • 1EAB8DBC-947F-4F6D-8651-4AA0946F685B.jpeg
    1EAB8DBC-947F-4F6D-8651-4AA0946F685B.jpeg
    37.8 KB · Views: 77
  • F3C31301-1FBE-4482-BEBB-95A345C32091.jpeg
    F3C31301-1FBE-4482-BEBB-95A345C32091.jpeg
    45.1 KB · Views: 76
  • 22BF293D-D819-47C1-85C4-C2EB5247989C.jpeg
    22BF293D-D819-47C1-85C4-C2EB5247989C.jpeg
    63.8 KB · Views: 74
2226B

https://imgur.com/a/Ib1sH
Ib1sH
 
New to Marantz. Starting small.
My former 1530, and current 2226b with Linn Index bookshelves. The 26 is fully redone, and is obviously LED, which I actually like (picture makes it look much brighter).
It's sounds great with the little Linn's.
39751060232_9281d30758_c.jpg
Unless you need a lot of power, you might never need to upgrade that 2226B. A very nice sounding and great looking receiver. Seems to have more power than 26 X 2.
 
Back
Top Bottom