Replacements for EH6SN7

[Minx]

Hi I've come into possession of a matched set of TAD 6L6WGC valves details as below:
https://www.tubeampdoctor.com/images/artikel/TAD-Datasheet_6L6WGC-STR Version1.1-08.07.11.pdf

Can these replace my Electro Harmonix 6sn7 valves when they need replacement? The amplifier is a hifi amp rather than a guitar amp. It's a Separo P88.
Many thanks in anticipation.

 

[Selmerdave]

No, they can't.

 

[Minx]

Thanks for quick reply. May sell them on.

 

[primosounds]

Hi I've come into possession of a matched set of TAD 6L6WGC valves details as below:
https://www.tubeampdoctor.com/images/artikel/TAD-Datasheet_6L6WGC-STR Version1.1-08.07.11.pdf

Can these replace my Electro Harmonix 6sn7 valves when they need replacement? The amplifier is a hifi amp rather than a guitar amp. It's a Separo P88.
Many thanks in anticipation.

Are you sure you have the tube designation correct? The 2 tubes you mention are not the same type or interchangeable. The 6sn7 is a small signal tube used for voltage amplification and phase splitting. The 6l6 is beam power tube used to create the high voltage output necessary to couple with the output transformer. The usa vintage 6sn7 are some of the best ever and there are many still available in nos condition. You should not have any trouble getting some.

 

[Minx]

Yes, I realise they're not interchangeable. I can get replacement 6sn7 no problem (as you say).
Thanks for the reply.

 

[Dr. Ears]

Hi I've come into possession of a matched set of TAD 6L6WGC valves details as below:
https://www.tubeampdoctor.com/images/artikel/TAD-Datasheet_6L6WGC-STR Version1.1-08.07.11.pdf

Can these replace my Electro Harmonix 6sn7 valves when they need replacement? The amplifier is a hifi amp rather than a guitar amp. It's a Separo P88.
Many thanks in anticipation.

No, the 6L6 are output tubes, the 6SN7 are input or driver tubes.