Sansui 210 Receiver

John Peplau

New Member
The signal strength meter does not work on AM or FM. VR201 & VR202 are reading 0.0 volts when strong local stations are tuned in.T203 leg reads 11.7 volts for TR204, while R231 Starts at 11.8 volts where it meets R205 from T204. The Caps check ok for ESR in circuit. I'm ready to pack it back up. Any help ? This is a Sansui 210 receiver.
 
Check C230 isn't shorted.

Have you verified that the meter itself works?

Sometimes they get sticky, or the coil burns out.
 
Back
Top Bottom