-
Feeling lucky? Check out the AK 24th Anniversary Giveaway thread and join in the fun!
Marantz 22xx wood case question
- Thread starter progger7
- Start date
Register to hide this ad
I am 99.9% positive that the WC-22 Marantz wood cabinet will fit both of these receivers.
vivavinyl
wax on, wax (not) off....
my 2252B fits sweetly NAKED 
tresbon: ) into my wc-22. the original wood for it is the wc-122, but i didn't like the look of it - more of a dress-up kit than a cab. the only issue with the 2252b/wc-22 combo is the two rear bottom screws don't line up - but the front ones do, and that's all i need!!
:thmbsp:
tresbon: ) into my wc-22. the original wood for it is the wc-122, but i didn't like the look of it - more of a dress-up kit than a cab. the only issue with the 2252b/wc-22 combo is the two rear bottom screws don't line up - but the front ones do, and that's all i need!!:thmbsp:
Arkay
Lunatic Member
vivavinyl said:my 2252B fits sweetly NAKED
:thmbsp:
That's pretty much all anybody needs for regular use. Heck, if it is only going to sit there on the shelf and play music, you could probably get by with no screws holding them together. Be careful if you move/ship the things, though: if you can't have all four screws anchored, it would be safer to pack/ship them separately, rather than rely on the reduced strength of only two screws. I might be erring on the side of over-caution, but better safe than sorry. You could always drill another set of holes to match up, of course, but personally I'd be very reluctant to do that. :nono:
Tucker99
Super Member
2215B wood case to a 2285B?
Can the case from the 2215B fit on a 2285B? I have the 2285 sans wood and was looking at buying a 2215B just for the wooden case. Looking at the various threads here it appears that all the 22xx series cases fit ALL the 22xx receivers...correct??
Thanks
Can the case from the 2215B fit on a 2285B? I have the 2285 sans wood and was looking at buying a 2215B just for the wooden case. Looking at the various threads here it appears that all the 22xx series cases fit ALL the 22xx receivers...correct??
Thanks
ruesselschorf
Well-Known Member
Hello mantis,
Mr. Kreuder of Bonn, Germany makes perfect Marantz cabinets, here is an example:
he also sells on ebay.de - no affiliation
Helmut
Mr. Kreuder of Bonn, Germany makes perfect Marantz cabinets, here is an example:
he also sells on ebay.de - no affiliation
Helmut
Tucker99
Super Member
2215B case onto a 2285B
Can the case from the 2215B fit on a 2285B?
I have the 2285 sans wood and was looking at buying a 2215B just to get the wooden case for use on my 2285B.
Looking at the various threads here it appears that all the 22xx series cases fit ALL the 22xx receivers...correct??
I just want to be sure that the case from such a small wattage unit will fit the larger unit.
Thanks
Can the case from the 2215B fit on a 2285B?
I have the 2285 sans wood and was looking at buying a 2215B just to get the wooden case for use on my 2285B.
Looking at the various threads here it appears that all the 22xx series cases fit ALL the 22xx receivers...correct??
I just want to be sure that the case from such a small wattage unit will fit the larger unit.
Thanks
ruesselschorf
Well-Known Member
...they all have the same faceplate dimensions (44cm wide) But the small ones 2215/2216 are only 29cm deep. Have a 2216 cabinet here that has a total depth of 32cm. A 2285 needs at least ~ 40cm. So a 2215 would fit in a 2285 cabinet but not the other way around.
Helmut
Helmut
ruesselschorf
Well-Known Member
the vented area is metal, little bit thicker than original WC-22, WC-23
Helmut
Helmut
ruesselschorf
Well-Known Member
The original metal hood can stay on, or remove it for better ventilation. Just remove the plastic feet from the receiver before you slide it into the cabinet from the front.
Helmut
Helmut
namahealani
Active Member
tomefs said:
I'll take one! PM sent. I'll sell my old one on ebay. Gotta have a new one to go with the 2270 from Echowars (looks and sounds like new)!
