Duffinator
Spin The Black Circle
They are finished. Well almost. As you can see from the photos they look dry. I used the 3M pad to apply the Watco and I either put it on inconsistently or did not put enough on. In the past I've used an old towel to apply oil/stain and if I reapply more Watco that's what I will use. So do I apply another coat of Watco? Or apply some lemon oil? Tung oil? If I apply another coat of Watco will that further darken the cabinets?
The grills cleaned up nicely but each has a very small hole on a bottom corner. The horns were in better condition than B's so I just cleaned them up. The one that was dropped had a couple of small scratches and touched it up with some Testors flat black model paint. Todd is right they are not black all the way through and appear to be painted the same color as the front and rear baffles.
The grills cleaned up nicely but each has a very small hole on a bottom corner. The horns were in better condition than B's so I just cleaned them up. The one that was dropped had a couple of small scratches and touched it up with some Testors flat black model paint. Todd is right they are not black all the way through and appear to be painted the same color as the front and rear baffles.
