Audiokarma Featured Sponsor

Go Back Home Audio Stereo Discussion Forums > Yamaha

We appreciate your help

in keeping this site going.
Thread Tools Display Modes
Old 04-03-2012, 02:31 PM
uxwbill's Avatar
uxwbill uxwbill is offline
Lurking in the Shadows
Join Date: Sep 2010
Location: Illinois
Posts: 1,505
Originally Posted by mountaindew View Post
no.I even took a digital camera turned it on pointed the remote at it and it did not flash on the screen.I read somewhere that if you do that and it doesnt flash then its in the remote

Many digital cameras and camcorders have an IR blocking filter in place over the sensor. This will greatly weaken--or totally remove--any sign of emission from the remote control's LED when viewed on the camera.

If your camera has a "night mode", try enabling it and repeat the test. If not, you may need to try another camera or do the test in a fairly dark room, while looking for the faintest response from the camera.

You can perform another test using an AM radio placed near the remote. Turn the radio on, tune to a relatively quiet spot on the dial, turn the volume up and hold the remote near the radio while you hold a button on the remote. You will hear some kind of a repeating noise that should stop shortly after releasing whatever button you happened to press.

Some experimentation with remote position and radio tuning may be required. This won't prove that the IR LED is working or that the right signal is being sent, but there is a good chance that the remote is working properly if you can hear it affecting the radio.

Should you have any fluorescent lighting (or newly installed CFL bulbs), turn them off. Also block sunlight out of the room as best you can. Try the remote again.
Technics SA-110, 120, 150, 190, 210, 310, 550, 560, 929, 946, 1010, 5170, SU-Z35
Sherwood, Realistic, Insignia, Pioneer, Kenwood and MANY more...
Reply With Quote
Old 04-03-2012, 03:41 PM
mountaindew mountaindew is offline
AK Member
Join Date: Jul 2010
Posts: 130
I finally got the remote apart,cleaned the contacts and now all working fine.Thanks to everyone for your suggestions
Reply With Quote
Old 04-03-2012, 04:08 PM
avionic's Avatar
avionic avionic is offline
Aim High !!!
Join Date: May 2006
Location: Fort Dodge, Iowa -Northern end of"tornado alley"
Posts: 24,650
I knew you could do it!
Bridged Yamaha B-6's l C-85 l PF-800/DL-160 l CA AZUR 740 l

Keep it pithy!
RET USAF 1978-1998

"In Artie we trust"-- PPP
Reply With Quote
Old 04-03-2012, 05:25 PM
mountaindew mountaindew is offline
AK Member
Join Date: Jul 2010
Posts: 130
Reply With Quote
Old 04-03-2012, 07:15 PM
Raynald's Avatar
Raynald Raynald is offline
AK Member
Join Date: Dec 2007
Location: Montreal
Posts: 3,518
I had to do the same to a DSP-A1000 remote and I learned that to open it you have to go just past the point where you are absolutely convinced you are going to break it for it to open.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 06:01 AM.

Friends of Audiokarma
We appreciate your help in keeping this site going.
Sonic Craft
Capacitor World
Vintage Home Audio
Organ Donor Parts
Wargos Electronics
Parts Connexion
Take Five Audio
Sound Stage Direct
Audience AV
Simply Speakers
The Tube Store
Howard Products
Musical Paradise
FM DX Antenna
McIntosh Cabinets
Many Moons Audio
BOI Audio Works
Yesterday's Audio
DeWick Repairs
RSL Speakers
MCM Electronics
Audio Doctor
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
ęCopyright 2002-2014, All rights reserved.