KR9600 no safety click.

S

srinath

Super Member

• Oct 25, 2014

• #21

OK I broke the tuner pointer off and the tuner wires off cos I attemped to get that center plate out - which I did, after cutting the bottom rail out - so you can remove the wires and then unscrew and remove that plate.
Anyway where does the wires from the tuner pointer go ? It seems to want to break off clean off its moorings.

Someone with an intact 9600 please tell me - I seem to not be able to tell at all.

Thanks.
Srinath.

 

S

srinath

Super Member

• Oct 30, 2014

• #22

Cover pics

Oh the pieces got back from powdercoating.
I had forgotten what powdercoating does to these things. Plus its the first amp part I am powder coating. I am used to bike parts, I'd coat anything, and they would end up barely recognizeable.

Check out these pics.

The center panel was really fugly. I had to cut the bottom hole cross bar to get it out, else I had to untwirl 1000 wires. I've got a few loose wires, most notable the 7v AC out from the fuse board. I also made a few mistakes, so if anyone is planning a dismantle of their 9600, please ask. Hey, I'm useless electronically, have to be good for something right ...

Cool.
Srinath.

 

Attachments

• 
  IMG_5315.jpg

  79.3 KB · Views: 45
• 
  IMG_5316.jpg

  61.2 KB · Views: 37
• 
  IMG_5317.jpg

  97.7 KB · Views: 40
• 
  IMG_5318.jpg

  64.2 KB · Views: 39
• 
  IMG_5319.jpg

  65.1 KB · Views: 34

S

srinath

Super Member

• Oct 30, 2014

• #23

Couple of before pics. I took these to show me where the wires I cut go. Ofcourse that doesn't include the wires that broke via my stupidity.
Cool.
Srinath.

 

Attachments

• 
  IMG_5312.jpg

  56.1 KB · Views: 48
• 
  IMG_5311.jpg

  85.9 KB · Views: 46

S

srinath

Super Member

• Oct 30, 2014

• #24

Scary pics just for haloweeeeennnnn

The scariest 11-12 words in the english language.
Hello, I'm srinath and I am going to fix this amp.

Cool.
Srinath.

 

Attachments

• 
  IMG_5320.jpg

  118.4 KB · Views: 43
• 
  IMG_5321.jpg

  115.2 KB · Views: 42

S

srinath

Super Member

• Oct 30, 2014

• #25

See that nice blue wire in the pic. Where does it go. Its connected to pin 6 of the fuse board. It carries 7v AC out of the fuse board.
Thanks.
Srinath.

 

petehall347

the brandy coffee man

• Oct 30, 2014

• #26

are the lamps lighting up ?

 

S

srinath

Super Member

• Oct 30, 2014

• #27

I am not powering it up with its guts falling out like that.
Maybe next week. Its getting more assembled and rear panel has rust spots that have to be painted. Then It will be powered up and I'll check.
The wire now is completely broke off.
Cool.
Srinath.

 

S

srinath

Super Member

• Nov 19, 2014

• #28

What are these "rare" boards ?

What are these apparently rare foldback boards in a 9600 ?

Cool.
Srinath.

 

Attachments

• 
  KR_9600_alternate1.jpg

  70.6 KB · Views: 34
• 
  KR_9600_alternate2.jpg

  88.1 KB · Views: 30
• 
  KR_9600_alternate3.jpg

  69.8 KB · Views: 28

D

diepbtt

Active Member

• Nov 19, 2014

• #29

srinath said:

Oh, well, I guess I can copy that one on diyaudio and put those components in a separate circuit board.
Thanks.
Srinath.

Click to expand...

I found a link in Japan they did replaced TA-100W of trio KA-7500(aka KA-8300 or 9800) with separate circuit board:
http://www.suwa-koubou.jp/repair/ka_7500/ka_7500_2.html

http://www.excite-webtl.jp/world/en....suwa-koubou.jp/repair/ka_7500/ka_7500_2.html

It is not for TA-200W but i hop you may get some usefull informations for your modding.

 

S

srinath

Super Member

• Nov 20, 2014

• #30

I am not smart enough to do or understand these. I have to buy somehting that will work off ebay and solder it in.
Cool.
Srinath.

 

SicMan

Fire up those speakers

Subscriber

• Nov 20, 2014

• #31

srinath said:

What are these apparently rare foldback boards in a 9600 ?

Cool.
Srinath.

Click to expand...

Those 2 boards get wired across the output amp board, they were a mod by Kenwood..

see this thread
http://audiokarma.org/forums/showthread.php?t=623861

John M

 

Last edited: Nov 20, 2014

S

srinath

Super Member

• Nov 21, 2014

• #32

Perfect. Its in addition to the TA200w and supposed to protect it.
Thanks.
Srinath.

 

SicMan

Fire up those speakers

Subscriber

• Nov 23, 2014

• #33

Parting the unit out on Ebay ???.. should ask around here on Bartertown.. if people could use those parts.

 

Last edited: Nov 23, 2014

S

srinath

Super Member

• Nov 23, 2014

• #34

I hadn't considered that. I will, I am still hoping to find this one's matched 9600, cos I know of quite a few round here.
Cool.
Srinath.