CR-2020 followed me home

I was really not looking for a project but....

Not quite as perfect as it looking in the ad but still the nicest CR-x20 I have seen around here. The wood is in very good shape, just light scratches you have to look at it in the right light, at the right angle, to see. The metal work seems to be perfect. The coupler switch still has the protector and screws. Needs a good cleaning as it was owned by a smoker at some point. Fortunately I know the metal work on this series cleans up really nicely. The screws and cleats that hold the case on are missing. Meter bulbs out, all red indicators lights work as does the dial pointer light. Original AM antenna in place, back panel in great shape.

Now I have to find someone who can fix it. Hopefully the SB mods will bring it back and there will not be anything else lurking.

I think BKTHEKING is in Canada - see if you can contact him for repairs.

(edit: Ottawa)

Great suggestion, Ottawa is not so far away.

I'm in New York with a non-working 2020. Anybody know anyone competent enough to repair?

Well, I jiggled the relay a bit and it's working now.

vinyl fiend said:

Well, I jiggled the relay a bit and it's working now.

Click to expand...

You have a bad solder connection on the P/S board or the Electrolytic board. Or both boards. Most likely the resistors covered in the SB have desoldered themselves.

Thanks Avionic!