Yamaha CR-800 receiver pops through speakers when changing functions. ??

daveyh

AK Subscriber
Subscriber
I have a Yamaha CR-800 receiver and it pops through speakers when changing functions from FM to phono or to aux. Is this normal for these units?

I have cleaned the function switch more that once with Deoxit 5 and it still does it. Also cleaned all other switches. Any ideas?

I recently rebuilt the power supply board but nothing else. Has always done it.
 
Problem solved.

It was some bad caps in the EQ board. Replaced all the caps in the EQ and it fixed the problem. Quite as a mouse when switching functions.
 
It was some bad caps in the EQ board. Replaced all the caps in the EQ and it fixed the problem. Quite as a mouse when switching functions.

Good thing! Leaky caps will damage carbon track controls.

Sent from my SM-N900V using Tapatalk
 
Is there a tutorial on how to do this somewhere? I looked in the search function and came up with nothing. Thank you!
 
Is there a tutorial on how to do this somewhere? I looked in the search function and came up with nothing. Thank you!
What issues are you having ? Start a new thread for your piece of gear.
 
Back
Top Bottom