CR-2020 missing a cap

vinyl fiend

Active Member
I've been poking around the 2020 cap board to try to get the relay to switch over and I discovered it's missing a cap. It goes where the blank circle is. Does anyone know the value/type? any help would be appreciated. thanks
 

Attachments

  • IMG_20150716_142711_717.jpg
    IMG_20150716_142711_717.jpg
    77.4 KB · Views: 43
  • IMG_20150716_142727_347.jpg
    IMG_20150716_142727_347.jpg
    85.8 KB · Views: 38
C719, 10µf 35V. I have no idea if it is supposed to be there or not. It's part of the -25V regulated supply. I also do not see that its absence would create any big problems.
 
I've been poking around the 2020 cap board to try to get the relay to switch over and I discovered it's missing a cap. It goes where the blank circle is. Does anyone know the value/type? any help would be appreciated. thanks

Thats not the electrolytic cap board but it does plug in to the electrolytic cap board. Thats the power supply/protect board.
 
Upon double checking my unit here. It does not have that cap installed.
 
Last edited:
Back
Top Bottom