ranf1970
Life without music would be a mistake.
Hey AKers,
Hope this finds you well. I just got a CA-2010 and two bulbs are working (right meter), but the two on the left meter and the one in the middle are not lit. I read in another post that this might be a fuse because usually when one lamp goes out, they all go out.
My question is how to replace the bulbs (if necessary). I'll double check to see if it might be a fuse. I saw this on replacing bulbs for an 810, but it looks different from a 2010: https://sites.google.com/site/vintageaudioprojects/relampingayamahaca-810integratedamp Step by step would be awesome.
Any thoughts, advice and encouragement is greatly appreciated! Thanks in advance!
Hope this finds you well. I just got a CA-2010 and two bulbs are working (right meter), but the two on the left meter and the one in the middle are not lit. I read in another post that this might be a fuse because usually when one lamp goes out, they all go out.
My question is how to replace the bulbs (if necessary). I'll double check to see if it might be a fuse. I saw this on replacing bulbs for an 810, but it looks different from a 2010: https://sites.google.com/site/vintageaudioprojects/relampingayamahaca-810integratedamp Step by step would be awesome.
Any thoughts, advice and encouragement is greatly appreciated! Thanks in advance!