Has anyone recapped a Yamaha CA-600 and would be willing to share their BOM list? I plan on doing mine in the next few months. I realize my unit may not be exactly the same as another unit, but at least that would be a starting point. I’d like to replace all electrolytic caps, tantalums, fuse resistors as well as any transistors, diodes, etc. that are known to be failure-prone. I haven’t been able to find much info on the CA-600, so far this is what I’ve found:
4700 uF 63V electrolytic
4700 uF 63V electrolytic
10 uF 10 V tantalum
4.7 uF 16 V tantalum
1 uF 35 V tantalum
4.7 uF 35 V tantalum
33 uF 10 V tantalum
1 uF 35 V tantalum
3.3 uF 3 V tantalum
1 uF 35 V tantalum
100 Ohms 1/2 W fuse resistor
100 Ohms 75 mA fuse resistor
47 uF 50 V bipolar
WZ-120 zener diode
3.9 Ohms 1/2 W fuse resistor
47 Ohms 1/2 W fuse resistor
47 Ohms 100 mA fuse resistor except US model
4700 uF 63V electrolytic
4700 uF 63V electrolytic
10 uF 10 V tantalum
4.7 uF 16 V tantalum
1 uF 35 V tantalum
4.7 uF 35 V tantalum
33 uF 10 V tantalum
1 uF 35 V tantalum
3.3 uF 3 V tantalum
1 uF 35 V tantalum
100 Ohms 1/2 W fuse resistor
100 Ohms 75 mA fuse resistor
47 uF 50 V bipolar
WZ-120 zener diode
3.9 Ohms 1/2 W fuse resistor
47 Ohms 1/2 W fuse resistor
47 Ohms 100 mA fuse resistor except US model