rotel ra 1312

georgedannyg

Well-Known Member
i turned on my rotel today and when it turned on the protection relay kick in and then kicked back out i was wondering if anybody has rain in to this before i do not have a service manual it did not blow any fuses
 
I can't offer any advice on your problem, but earlier this year I was able to get a service manual for an RA1412, directly from Rotel. If you end up needing a manual, I would suggest you send them an email. They were more than friendly :thmbsp: emailing me a 6-part, 30 mb file.
 
georgedannyg,
I'm just curious,you tried for a long time to lay your hands on the Kenwood 700C and 700M,then after you got them you sold them again.
If my curiosity is asking you a touchy question you can simply not answer,but I was really surprised when you sold the two components. :yes: :scratch2:
 
Same issue but not a ground wire loose, used to work fine before until now mine has new outputs and a recap job and it was fine, idk what is causing the relay to come in and out of protection like every few seconds.
 
Back
Top Bottom