I just recently upgraded from a pair of Infinity RSM to Infinity RS 1.5 speakers.
Previously, I had acquired the CR-2040 after having tried a combination of 70s receivers, 80s separates and some modern receivers. The CR-2040 had ended my search. It powered my RSMs quite beautifully for the volume I listen to in my apartment.
That is between low volumes to occasional partying. This was sufficient to shake things in my apartment. The sound has always been very clean and the tuner is excellent.
Once I got the RS 1.5 (with the famed watkins woofers), I did notice that the bass (and hence the overall sound) had just got more tight and clean. This is exactly what I was looking for.
However, I did notice that they required way more juice (duh). I notice some clipping at 60% volume and the overload lights going off. So, I decided to keep the volume to reasonable levels while shopping for a decent 200w amp switching the 2040 duties to a pre-amp. But even at lower level, I would notice sub bass thumps that go off even when listening to talk on the radio. Turning the bass all the way down would not help with that.
As it turned out, I showed my girlfriend how to stream her podcasts to the stereo and although she had previously been unenthusiastic about the stereo, was not an active user.
This was a pleasing development that did not last long. The amp just stopped working while she was listening to a podcast and now it does not turn on.
What does this mean? Could it just be a fuse or did it go to protection? How do I get my amp back up, it's not a great time in my home without the music.
Previously, I had acquired the CR-2040 after having tried a combination of 70s receivers, 80s separates and some modern receivers. The CR-2040 had ended my search. It powered my RSMs quite beautifully for the volume I listen to in my apartment.
That is between low volumes to occasional partying. This was sufficient to shake things in my apartment. The sound has always been very clean and the tuner is excellent.
Once I got the RS 1.5 (with the famed watkins woofers), I did notice that the bass (and hence the overall sound) had just got more tight and clean. This is exactly what I was looking for.
However, I did notice that they required way more juice (duh). I notice some clipping at 60% volume and the overload lights going off. So, I decided to keep the volume to reasonable levels while shopping for a decent 200w amp switching the 2040 duties to a pre-amp. But even at lower level, I would notice sub bass thumps that go off even when listening to talk on the radio. Turning the bass all the way down would not help with that.
As it turned out, I showed my girlfriend how to stream her podcasts to the stereo and although she had previously been unenthusiastic about the stereo, was not an active user.
This was a pleasing development that did not last long. The amp just stopped working while she was listening to a podcast and now it does not turn on.
What does this mean? Could it just be a fuse or did it go to protection? How do I get my amp back up, it's not a great time in my home without the music.