Yamaha cr-840 please help lights not working!

GMAN1970

GMAN1970

Active Member
Ok, so I picked up a pristine CR-840 and all work perfectly except all lamps, the indicator light work but anywhere there is a lamp, no worky! Is there a fuse that corresponds with the lights? Please bare in mind that im a speaker kinda guy so keep it short bus simple! Thank you in advance!:tears:
 
lights for cr840

Hi there. Have you confirmed that they aren't just burnt out? I replaced the bulbs on mine. If you search the forum you can find a few entries on the whole cr840 bulb situation. The are run in series so if one is gone others on the circuit won't work.

I am not electronics guy, but the repair is pretty easy. You can contact dwojo@earthlink.net to get the replacements.

Hope this helps. _ES_
 
Actually ,they are wired in series-parallel. Eight bulbs,in 4 sets of two bulbs. So you have one bulb in each set burnt out. I'd replace them all at once.
 
I need a set for my 940 and thought I read they are type 2182's. So I ordered some and they are too large. Anyone know what kind they should be?
 
You must log in or register to reply here.

Similar threads

bmc1987
Yamaha CR 840 Protection mode
Replies
19
Views
4K
avionic
avionic
mrflex65
cr-840 lights out....
Replies
2
Views
476
mrflex65
mrflex65
G
Yamaha CR 840 where to get bulbs
Replies
3
Views
1K
avionic
avionic
P
Yamaha CR-840 FM Problem
Replies
4
Views
711
Bob91343
B
L
Yamaha CR-840 won't turn on
2
Replies
22
Views
843
lunchtruck
L
Back
Top Bottom