PL-630 recap question

hertzdonut

Press Play and Stand Back
As I'm looking to ensure longevity for my PL-630 turntable, I've started digging into the boards, seeing what's there, and finding suitable replacements. The first thing I realized is my Drive Control Assy board is a rev B, PWG-015. (The schematic shows it as a PWG-017. I guess that would make mine an earlier version?)

Anyway, I grabbed a snapshot of it with my phone:



I've started to compile the list for this board, and looked up what I thought could be used as replacements. (I'm going to do the other boards, but wanted to see if I'm on the right track before I go further, incl transistors)

PWG-015-B: C21: 100uF 6.3v CEA: 647-UKT0J101MDD 100uF 6.3v
PWG-015-B: C31: 1uF 50v CEA: 647-UKT1H010MDD 1uF 50v
PWG-015-B: C34: 1uF 50v CEA: 647-UKT1H010MDD 1uF 50v
PWG-015-B: C37: 100uF 35v CEA: 647-UKT1V101MED 100uF 35v
PWG-015-B: C38: 10uF 35v CEA: 647-UKT1V100MDD 10 uF 35v
PWG-015-B: C39: 10uF 35v CEA: 647-UKT1V100MDD 10 uF 35v
PWG-015-B: C40: 10uF 35v CEA: 647-UKT1V100MDD 10 uF 35v

If anyone can tell if these will work, I would be much obliged. (I am in no way an EE, and selected these because I thought the KT series would be a good fit, and the ratings all match what is actually on my board.)

Thanks in advance!

Jeff
 
Back
Top Bottom