Swapping C45 IC firmware

ajdo

Member
I received new IC firmware from McIntosh for my C45. Don't know what the differences are between the old and new but since I removed C45 from my audio system, using D100 for now as Preamp/DAC, thought I would take the time to change C45 firmware.
Apart from swapping old and new ic, is there anything else that should be done to C45, reseting setting or anything else necessary for new ic to be recognized by C45 ?
Thx... AJ
 
I'd suggest you contact the Mac factory folks. With any hardware upgrade, there should be some Release Notes describing the changes in the firmware the C45 will now be using.

Also, ask them if there are any other steps needed to be sure the C45 is prepared to accept the new firmware.

Cheers,

David
 
Thx much... will do. Received the ic from Mc with no instructions. Will call Mc again tomorrow for more instructions !
AJ
 
Back
Top Bottom