bigbobster
New Member
I recently acquired a CX-1000 and a MX-630 and after a week of listening I like them a lot. It's a significant upgrade.
However, the CD input on the CX-1k is flaky. It works for a while but then drops a channel or is very distorted. Plugging and unplugging the source usually fixes it for a while. I have moved over to the tuner input, which is fine, but would like to fix the CD input.
I'm thinking there is a cold solder joint somewhere near the input jack. Before I attempt surgery on unfamiliar territory I thought the massed experience on the AK board may offer some guidance.
Any one out there work on these things?
Thanks, Bob
However, the CD input on the CX-1k is flaky. It works for a while but then drops a channel or is very distorted. Plugging and unplugging the source usually fixes it for a while. I have moved over to the tuner input, which is fine, but would like to fix the CD input.
I'm thinking there is a cold solder joint somewhere near the input jack. Before I attempt surgery on unfamiliar territory I thought the massed experience on the AK board may offer some guidance.
Any one out there work on these things?
Thanks, Bob