Fisher SA-1000 and X101-C Door Cover the Same?

70rtconv

Active Member
Beside the labeling on the back of the door, is the door between the SA-1000 Tube Amp and X101-C Integrate Amp the same? From the pictures that I have seen, they looks to be the same. Anyone know for certain?
 

Attachments

  • Fisher SA-1000.jpg
    Fisher SA-1000.jpg
    21.9 KB · Views: 17
  • Fisher X101C-4.jpg
    Fisher X101C-4.jpg
    7.4 KB · Views: 12
Good question. I can't imagine that they're the same.
First of all, the X-101-C is an integrated amp and the SA-1000 is an amp. So, at a minimum, the internal markings when you flip the door down would be different.
Second, you'd have to know the width of each door.
I've never personally seen an SA-1000, so I can't say for sure.
 
Fisher SA 1000 Faceplate Width

Thanks for the feedback. The Fisher SA-1000 Amp Faceplate Width is 15 1/8 inches. From looking at the picture, the back of the X101-C door has switches label which I believe can be peeled off. On the SA-1000 amp, there is no label on it.

I got a strong feeling that they are the same (except for the added label for X101-C). It makes sense to use common and interchangeable parts when it is possible.
 
Thanks!!! If the X101-C is also 15 1/8 inches in Width, then the door cover must be the same as the SA-1000 flip down door cover is also 15 inches wide.

Now, another question.....is the label on the back of the X101-C door cover can be peeled off? I am asking this is because I need one for a SA-1000 amp.
 
Back
Top Bottom