quartersaw
Super Member
Something didn't come out quite right with the output board transistor upgrade that I executed some weeks ago. I was very meticulous with the removal/installation of the components, but the amp has a background hum that was not there before. The left channel output seems to be lower as well.
I upgraded the small + - caps on both my 2300's at the same time, but the transistor upgrade on Amp 'B' took a wrong turn somehow.
I don't have any test equipment other than a Multimeter, and a Variac, so I road tripped the amp down to Audio Classics. They tell me that it could possibly be ready by Friday. The meters were also out of calibration, so I figured I'd have the amp spec'd out and bench tested as well.
I'm going to finally give a shot at running them as Monoblocks when the amp comes back home.
I upgraded the small + - caps on both my 2300's at the same time, but the transistor upgrade on Amp 'B' took a wrong turn somehow.
I don't have any test equipment other than a Multimeter, and a Variac, so I road tripped the amp down to Audio Classics. They tell me that it could possibly be ready by Friday. The meters were also out of calibration, so I figured I'd have the amp spec'd out and bench tested as well.
I'm going to finally give a shot at running them as Monoblocks when the amp comes back home.
Last edited: