My PX-3 is erratic

rajoo

Less pixels more decibels
Subscriber
My Yamaha PX-3 turntable has started to behave erratically.
The ARM CONTROL button, UP/Left Arrow does not seem to get any response. The UP/Right Arrow seems to work OK.
So the only way to get the TT going is to push the "30" button which starts up the table some times and other times not. If it does not, I need to turn the power off, unplug the power cord and so on. The CUT button seems to work fine.

Any help in understanding or "fixing" this problem will be greatly appreciated. I really have not gone beyond the initial working or not working test. So please read this as PX-3 is erratic and I am clueless. Thanks.
 
there was someone on ebay that rebuilt arms for about $130, but I have not seen him for a while do a search on p-x3
 
Back
Top Bottom