Yamaha CR-820 idle current adjust

Narodow

Active Member
Can anyone help me with the final transistor idle current adjustment for a Yamaha CR-820 receiver? I searched AudioKarma and could not come up with the adjustment procedure. I am sure it is out there somewhere, but I jut cannot find it. I have the schematic for the receiver and know that the adjustment pots are VR701 and VR702. I suspect that I measure the idle current across one of each channel's final transistor emitter resistor. Are there test points that I can take the measurement and what is the reading I should adjust for? Thanks!
 
I'm sure that AK Member Merrylander will have the instructions. I just did a search and there is one thread with somewhat complicated instructions, but I know that it's simpler (I have adjusted a CR-420 & CR-620 & CR-2020). There are two test points (labeled TP 1 & TP 2 or TP 3 and TP 4) and a variable resistor VRxxx (usually labeled "Idling Cur" or "IDL CUR").

Someone will come along shortly with the setting and procedure.
 
Just scored a CR-820 for a bargain.
Anyone willing to share the details of adjustment once again?

It seems the details here have disappeared.

Thanks in advance!
 
Back
Top Bottom