laatsch55
Super Member
My bought brand new in 1975 Spec 2 has gone into protection mode and will not come out, even cycling on/off switch.
I've searched a lot of threads the last couple days to make sure I wasn't wasting anyone's time.
Protection light on, right channel reads 10 watts on meter, DC offset a week ago was 82mv rt channel, 8mv left. I understand its a changeout of the 2SA798 Trans, got some coming. Also read Echowar's "replacing the relay" checked the coil on said relay and it is indeed open.
Is there anything I'm missing here, Also while Im in there what else should
be changed ? Thank You Gentlemen for any and all advice.
I've searched a lot of threads the last couple days to make sure I wasn't wasting anyone's time.
Protection light on, right channel reads 10 watts on meter, DC offset a week ago was 82mv rt channel, 8mv left. I understand its a changeout of the 2SA798 Trans, got some coming. Also read Echowar's "replacing the relay" checked the coil on said relay and it is indeed open.
Is there anything I'm missing here, Also while Im in there what else should
be changed ? Thank You Gentlemen for any and all advice.