• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

My Fisher Electra Resto Begins

relaximus

Consoles 'Я' Us
My newly acquired 1963 Custom Electra VI (E-48) as it sits.

attachment.php


attachment.php


As you can see, the cabinet is virtually unscathed but for a few minor blemishes on the feet from the vacuum cleaner.

Dave
 

Attachments

  • 100_1690.jpg
    100_1690.jpg
    109.5 KB · Views: 79
  • 100_1691.jpg
    100_1691.jpg
    90.9 KB · Views: 100
  • 100_1692.jpg
    100_1692.jpg
    107.7 KB · Views: 62
  • 100_1693.jpg
    100_1693.jpg
    100 KB · Views: 55
  • 100_1694.jpg
    100_1694.jpg
    101 KB · Views: 95
Register to hide this ad
The 480-A chassis free at last!
 

Attachments

  • 100_1699.jpg
    100_1699.jpg
    91.9 KB · Views: 56
  • 100_1697.jpg
    100_1697.jpg
    95.4 KB · Views: 69
  • 100_1707.jpg
    100_1707.jpg
    99.6 KB · Views: 61
The great void with the 490-T and MPX-65 still in place.
 

Attachments

  • 100_1700.jpg
    100_1700.jpg
    179.1 KB · Views: 41
  • 100_1701.jpg
    100_1701.jpg
    100.4 KB · Views: 39
  • 100_1702.jpg
    100_1702.jpg
    183.7 KB · Views: 38
Tube layout.
 

Attachments

  • 100_1705.jpg
    100_1705.jpg
    182.8 KB · Views: 21
  • 100_1704.jpg
    100_1704.jpg
    182.9 KB · Views: 32
  • 100_1703.jpg
    100_1703.jpg
    156.1 KB · Views: 24
The goodies and 3 little surprises found inside!

Now, it's off to the oven for a little bake time.

Dave
 

Attachments

  • 100_1708.jpg
    100_1708.jpg
    95.3 KB · Views: 71
  • 100_1709.jpg
    100_1709.jpg
    145.1 KB · Views: 77
The 480-A chassis free at last!
That 480 chassis shore is purdy and about all I would have kept- (I'm a console slayer) Are you planning on restoring the entire unit including the furniture? Aligning that tuner should be fun, could you find a SAMs for it???
WOT
 
The knife switches were installed (I assume) by the PO to enable easier connection of external speakers. I bought the unit from his estate and his daughter said that he was something of an electronics tinkerer and had wired the house with speakers to be driven from this console. He bought the unit new.

Dave
 
The "Poor Man's Variac" is complete!

Next is the 480-A chassis, fresh from 2 hours in the oven @170 degrees (upside down).

After having passed a 25 watt bulb test with no tubes installed, I've now ramped-up to a 52 watt bulb with the tubes re-installed (the bulb isn't nearly as bright as it appears in the picture). Looking good so far. :thmbsp: Going to let let run at this voltage for an hour or two before going up to the 100 watt bug light. Then, a couple more hours there.

Dave
 

Attachments

  • 100_1716.jpg
    100_1716.jpg
    90.2 KB · Views: 75
  • 100_1714.jpg
    100_1714.jpg
    185.7 KB · Views: 50
  • 100_1712.jpg
    100_1712.jpg
    102.6 KB · Views: 66
  • 100_1711.jpg
    100_1711.jpg
    192.4 KB · Views: 50
The knife switches were installed (I assume) by the PO to enable easier connection of external speakers. I bought the unit from his estate and his daughter said that he was something of an electronics tinkerer and had wired the house with speakers to be driven from this console. He bought the unit new.

Dave

It's alive, It's alive!

spaceball.gif
 
The knife switches were installed (I assume) by the PO to enable easier connection of external speakers. I bought the unit from his estate and his daughter said that he was something of an electronics tinkerer and had wired the house with speakers to be driven from this console. He bought the unit new.

Dave

It's alive, It's alive!

lab1.jpg
 
That 480 chassis shore is purdy and about all I would have kept- (I'm a console slayer) Are you planning on restoring the entire unit including the furniture? Aligning that tuner should be fun, could you find a SAMs for it???
WOT
WopOnTour:

Yes, I am planning on keeping it as a complete unit. The furniture is in such amazing condition, to do otherwise, would be an audio sin (IMHO).

I have been unable to find anything on either of these chassis, other than a schematic graciously emailed to me by an AK member. A service manual would be a God-send right now!

Dave
 
WopOnTour:

Yes, I am planning on keeping it as a complete unit. The furniture is in such amazing condition, to do otherwise, would be an audio sin (IMHO).

I have been unable to find anything on either of these chassis, other than a schematic graciously emailed to me by an AK member. A service manual would be a God-send right now!

Dave

Did you search that awesome thread with Fisher consoles on it? Pershaps there is someone who posted your model that you could e-mail to see if they have one?
 
Did you search that awesome thread with Fisher consoles on it? Pershaps there is someone who posted your model that you could e-mail to see if they have one?
NY:

Yep, been all through Red's Fisher thread and came up empty. There is, apparently, so little information on these chassis that I am flying a little blind. Not just by the lack of info, but compounded by the fact that this is my first tube anything! But, I can't put into words how enthusiastic and excited I am by this thing. I, quite literally, shake when I touch it and its components. It truly is beautiful!!!

Dave
 
Now cookin' with the 100 watt bug light!
 

Attachments

  • 100_1723.jpg
    100_1723.jpg
    134.6 KB · Views: 29
  • 100_1724.jpg
    100_1724.jpg
    194 KB · Views: 56
The Garrard T-6. The idler wheel still has some life left in it. The stylus, kinda doubtful. Unidentifiable cartridge there, no doubt the original.
 

Attachments

  • 100_1719.jpg
    100_1719.jpg
    85.2 KB · Views: 26
  • 100_1718.jpg
    100_1718.jpg
    170.5 KB · Views: 34
  • 100_1722.jpg
    100_1722.jpg
    154.5 KB · Views: 51
Back
Top Bottom