Accuphase P-250 schematic needed

legarem

New Member
I bought an old Accuphase P-250 which has to be repaired

I would like to get the schematic diagram and the biasing voltage required.

Is it a good sounding amplifier ?

Thanks a lot
 
I bought an old Accuphase P-250 which has to be repaired

I would like to get the schematic diagram and the biasing voltage required.

Is it a good sounding amplifier ?

Thanks a lot

Did you ever find the schematic? I’m having a problem with my relay. It won’t energize and come out of protection. There is dc offset on both channels and I don’t know how to adjust.
 
I bought an old Accuphase P-250 which has to be repaired

I would like to get the schematic diagram and the biasing voltage required.

Is it a good sounding amplifier ?

Thanks a lot

Did you ever get your P-250 schematic and get it working? What was the problem if so?
 
@Rotoplooker

First of all kudo's with regards to your UN, Zappa references are few and far here.

2nd of all the poster you quoted and asked a question of posted that 13 years ago and other then updating his/her profile earlier this month hasn't posted in 9 years.
 
Back
Top Bottom