TubeJunkie
Master of None
I have several Marantz 2252b receivers. On one of them, I broke the wire lead on a SVT-3H bias diode (aka Themistor) I soldered it back together, but must have overheated it, and now it's toast. I was reading this thread
http://audiokarma.org/forums/index.php?threads/replacing-the-stv-3h-and-4h-diodes.279530/page-4
I want to use three UF1004 diodes in series and pot them in JB Weld. as mentioned in that thread link above. Problem is, Mouser is out of stock of the UF1004 diodes. The closest match I've found is RGP10 diode. it has a recovery time of 150ns, and the UF1004 is 50ns. Is this ok? Is there a better equivalent for UF1004? Thanks
http://audiokarma.org/forums/index.php?threads/replacing-the-stv-3h-and-4h-diodes.279530/page-4
I want to use three UF1004 diodes in series and pot them in JB Weld. as mentioned in that thread link above. Problem is, Mouser is out of stock of the UF1004 diodes. The closest match I've found is RGP10 diode. it has a recovery time of 150ns, and the UF1004 is 50ns. Is this ok? Is there a better equivalent for UF1004? Thanks