arnold_a1968
Member
can't find the right one and the screw type is only available in Mouser canada..cost so much to buy in US shipping and import tax.
here's what i've adapted..
here's what i've adapted..
CR-2020 slow/barely moving meters
- Thread starter basite
- Start date
arnold_a1968
Member
wire crimp with ring terminal screwed on chasis both side
arnold_a1968
Member
success..restoration complete
arnold_a1968
Member
i got everything working, i got left and right sound output but when i adjust the Idling Current following the Service manual to set at 10mV, i cannot adjust the left channel but the right is good i can set to 10mV.
both channel replaced the 2SC458 with KSC1845. I measured the resistance of the 4.7K Pot and the left is giving only 2K max but the right is 5.6K max. I'll try to pull out the Pot to measure it stand alone to see if
it's really the bad guy.
Any idea you guys can throw?
both channel replaced the 2SC458 with KSC1845. I measured the resistance of the 4.7K Pot and the left is giving only 2K max but the right is 5.6K max. I'll try to pull out the Pot to measure it stand alone to see if
it's really the bad guy.
Any idea you guys can throw?
