Wanted: Yamaha CA series meter
- Thread starter Emmbee
- Start date
clinic-audio
all on YAMAHA untill 1990
Wanted YAMAHA CA Meters
Hello Emmbee !
What do you mean by " most of the CA series meters will fit " each meter is different
meter from CA810 do not fit in CA2010 and ouput power is precised in the scale in each meter , you can't use one instead another one :scratch2:
Tell me which one (type) you need and I will let you know if I have some or not
Once you get the new pair, be very carefull with the new because I can't believe that two meters fail in the same unit without any reason
Hello Emmbee !
What do you mean by " most of the CA series meters will fit " each meter is different
meter from CA810 do not fit in CA2010 and ouput power is precised in the scale in each meter , you can't use one instead another one :scratch2:
Tell me which one (type) you need and I will let you know if I have some or not
Once you get the new pair, be very carefull with the new because I can't believe that two meters fail in the same unit without any reason
bktheking
Gitter Done!
I posted this morning but it never showed up.
First off pull the meter. Then measure it your DMM set to ohms and see if the winding is open or still in tact. If the pivot is seized you will need to take the meter a part. I've used deox or contact cleaner to free up the pivot, this is all assuming the hairspring isn't buggered.
First off pull the meter. Then measure it your DMM set to ohms and see if the winding is open or still in tact. If the pivot is seized you will need to take the meter a part. I've used deox or contact cleaner to free up the pivot, this is all assuming the hairspring isn't buggered.
clinic-audio
all on YAMAHA untill 1990
Hello
Sorry I take a look and I don't have any meters for 2010 . I have many but not these ones !
