2325 cracked Aux/Phono input board

[Bill S]

I'm helping a friend tend to a Marantz 2325 that must have been placed or dropped on the back end. The phenolic board that affixes the RCA inputs on the Aux and Phono inputs and the inputs are loose. Same with the phenolic board holding the power input lugs (switched and unswitched). How might I repair them or where can I find some parts out of a parts receiver?? Any ideas?

 

[JJCalvillo]

Epoxy is your friend.

 

[runningdog]

As salvage parts go, these two items may be relatively easy to find. The big auction site is a place to watch, and to find parts resellers that may have these.

 

[rBuckner]

Epoxy is your friend.

That or super glue them and brace with strips of plastic or better yet some pc board material.

 

[Bill S]

Epoxy is your friend.

I've temp secured it with some JB Weld and a plastic shim but the way the board is cracked really doesn't allow for a solid repair. The material splintered vs cracked around the screw holes. I've also placed an RCA patch cord on the terminals so there's no need to plug and unplug for now but its not a proper repair.

I'll keep an eye on eBay for a replacement from a parts unit.