Kind request for The Fisher emblem photo

[thom01]

I've restored my X-100c but it is missing the emblem that covers the screw for the faceplate.
I was wondering if someone would be king enough to take a high resolution photo of the logo on their amp/receiver so I can print it on decal and make my own.

It should look like this:



Here's my emblemless amp:

 

[nerdorama]

There is a seller on ebay that has reproductions of this logo for sale. There is also an original for sale from another seller. I searched for "Fisher logo" . Either option seems easier that rolling your own.

edit: sorry, I didn't notice you are in France at first view.

 

[thom01]

Thanks, yes, I'm in France.
I did find one on Ebay, but it was for Loudspeakers, so a bit too small.
It's a bit tricky to order stuff from across the pond these days...

 

[ncwalz]

I can check. What file format are you looking for? Vector or pixel? I think I bird logo itself if that would help.

 

[thom01]

I can check. What file format are you looking for? Vector or pixel? I think I bird logo itself if that would help.

Any format, really.
Yes, the bird logo might be trickier to get clear, but at this point, anything decent-looking logo would be an improvement!

 

[Dswankey]

I'm not sure if this helps but I thought I'd try

Thread 'Does anyone have a nice clean The Fisher "bird" image file?'

Jun 26, 2023

Thinking about engraving or maybe silk screening one on the brass faceplate of the little amp I'm building from Fisher console chassis.
I'm sure that's been done before.
Thanks!

• grindfix
• Replies: 8
• Forum: Fisher

 

[thom01]

I'm not sure if this helps but I thought I'd try

Thread 'Does anyone have a nice clean The Fisher "bird" image file?'

Jun 26, 2023

Thinking about engraving or maybe silk screening one on the brass faceplate of the little amp I'm building from Fisher console chassis.
I'm sure that's been done before.
Thanks!

• grindfix
• Replies: 8
• Forum: Fisher

Thanks, that's a good start!
I might be OK if I find fonts similar to the ones used for the text.

 

[ncwalz]

Here's a pdf containing the vector image.

 

[thom01]

Here's a pdf containing the vector image.

That's brilliant, thank you!

 

[thom01]

Not quite right, but the best I could do.
I need to find some kind of yellowish varnish to match the kind of yellowish (pardon, "champagne") tint of the faceplate...

 

[Dswankey]

That looks great!, other then Fisher enthusiasts who might notice the difference anyone else will have no clue

 

[thom01]

In case anyone else is interested, here's the pdf.

 

[Heller]

I created a quick&dirty Adobe Illustrator version:

 

[thom01]

I created a quick&dirty Adobe Illustrator version:

View attachment 3747401

That's much better, thanks!

 

[thom01]

There it is, in all its glory

 

[Dswankey]

I've restored my X-100c but it is missing the emblem ....so I can print it on decal and make my own.

It looks great!, curious what did you use to make the actual emblem?

 

[thom01]

It looks great!, curious what did you use to make the actual emblem?

View attachment 3748078

Thanks!
I cut a piece of aluminium to size from an old piece of heatsink, and glued a couple of cut-off screws with epoxy.
My girlfriend printed the logo kindly donated by Heller on her photo printer, and I used doubled-sided tape to stick it on.

 

[Heller]

Hey, that’t neat!

Could have provided you with a better logo version, if I knew:

The Fisher Logo remade — Postimages

postimg.cc

You can zoom-click once

 

[Dswankey]

Thanks!
I cut a piece of aluminium to size from an old piece of heatsink, and glued a couple of cut-off screws with epoxy.
My girlfriend printed the logo kindly donated by Heller on her photo printer, and I used doubled-sided tape to stick it on.

Respect!!!

 

[thom01]

I believ

Hey, that’t neat!

Could have provided you with a better logo version, if I knew:

The Fisher Logo remade — Postimages

postimg.cc

You can zoom-click once

I believe that's the one I used!